Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

• Journal of Marinesia only publishes papers written in English 
• Please make sure that authors understand and follow these terms before proceeding with the next step in article submission.
  The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor). Articles published in conferences will need to be altered before submission with at least 20% differences from the original paper, and pass our similarity check.
  Authors are bound to our Plagiarism Policy, thus careful considerations should be done before submitting the article. In any circumstances that Journal of Marinesia finds an article or is being published elsewhere that is identical to the one published in Journal of Marinesia, we will retract the article following COPE's guidelines on retracting articles and notify the author.
• The submission file is in Document file format (doc, docx. rtf, or odt), following the author guidelines and article template. Please make sure that you use Mendeley to help in referencing. A guide to using Mendeley as a reference manager is provided.
  Failure to follow the guidelines will cost you time and perhaps the rejection of your manuscripts.
• Where available, URLs or DOIs for the references must be provided, and try to use the most up-to-date references. Do pay attention that Journal of Marinesia prefers journal articles as references.
• Authors are discouraged from withdrawing submitted manuscripts after it is in the publication process (review, copyedit, layout, etc.,). During the time, Journal of Marinesia had spent valuable resources besides time spent in the process.
• Since Journal of Marinesia is a peer-reviewed journal, the instructions in Ensuring a Double-Blind Reviewed article needs to be followed.
• Enter your Whatsapp number in the comments field to make it easier for the editor to contact you if your email has a problem.

Author Guidelines

Before preparing and submitting article manuscripts, please note that author(s) are discouraged from withdrawing submitted papers after it is in the publication process (review, copyedit, layout, etc.). During that time, Journal of Marinesia had spent valuable resources besides time spent in the process.

Please prepare your manuscript before submission, using the following guidelines and the article template below:

Ethical Statement Author(s)
I (We) hereby confirm that :
The article I (we) have submitted to the Journal of Marinesia for review is original, has been written by the stated author(s), and has not been published elsewhere.
The article is not currently being considered for publication by any other journal and will not be submitted for such review while under review by this journal.
3. The article contains no libelous or other unlawful statements and does not contain any materials that violate any personal or proprietary rights of any other person or entity.
4. We have obtained written permission from copyright owners for any excerpts from copyrighted works (if any) that are included and have credited the sources in our article.

Format

Article files should be provided in Document format (doc, docx, rtf, and odt). We currently do not accept other formats, such as LaTex or PDF files.

Article Length

Articles should be between 10-20 pages, including references. A maximum of 4 pages long appendices are allowed.

Article Title

A title of 15 (fifteen) words maximum should be provided.

Author Details and Authorship

All contributing authors’ names should be added, and their names arranged in the correct order for publication. A correct email address should be supplied only by the corresponding author. The full name of each author must be present in the exact format they should appear for publication, including or excluding any middle names or initials as required. The affiliation of each contributing author should be correct on their author name.

The criteria of authorship are as follows; Substantial contributions to the conception or design of the work; or the acquisition, analysis, or interpretation of data for the work; drafting the work or revising it critically for important intellectual content; final approval of the version to be published; Agreement to be accountable for all aspects of the work in ensuring that questions related to the accuracy or integrity of any part of the work are appropriately investigated and resolved.

Structured Abstract

Authors must supply a structured abstract in their submission, which includes:

• Purpose/Introduction
• Design/methods/approach
• Findings/results
• Conclusions

A maximum of 200 words in total excluding keywords. It has to be in English and Indonesian regardless of the article's content's languages.

Keywords

The authors should provide appropriate and short keywords that encapsulate the principal topics of the paper. The maximum number of keywords is 5 (five) words.

Article Organization

The body of articles should be organized (at least) into the IMRaD structure as follow;

• Introduction Section provides adequate background or context (problem and its significance) of the study. The subject should not be written extensively. It is expected that the rationale or purpose of the study (gap analysis), the objective in general and specific, and hypothesis (if any) should be expressed clearly. Present a clear "state of the art" of the subject, which discussed literature and theoretical concepts behind it. A concise general background may be included in the article. Present at least 5 (five) recent related works to support the novelty of the research.
• Methods Section provides sufficient details to allow the work to be reproduced by an independent researcher. Methods that are already published should be summarized and indicated by a reference. If quoting directly from a previously published method, use quotation marks and also cite the source. Any modifications to existing methods should also be described. Indicate the participants observed, including demographic data, number of respondents, the rationale of respondent's selection, etc. Describe the design of the experiment, such as the experiment procedures, surveys, interviews, observation characteristics, etc. Write the complete research procedure. Be sure that explanations made in the article will allow other researchers to reproduce the work, or make future work out of it.
• Results and discussions. Write results in a logical sequence. Results with important findings should be presented first. When presenting results in a table or figure, do not repeat all those contents in the text. Present only the summary of the text. Describe only new and important aspects of the study. Do not repeat all information from the results section or any section above. Present limitations of the study. Write the issues that are new or unsolved, for future research. This section consists of the information on What/How the presented data were produced, no raw data should be present in the article. The produced data are presented in tables, or figures with an explanation of what is the result/findings from the work. The section will also need to address connections between findings and basic concepts or hypotheses made earlier. Authors should also express whether any arguments were needed relating to other works from other researchers. Write implications made by the work related to theoretical or applications.
• Conclusions Section. The conclusion should be linked to the title and objectives of the study. Do not make statements not adequately supported by your findings. Write the improvements made to the industrial engineering field or science in general. Do not make further discussions, repeat the abstract, nor only list the results of research results. Do not use bulleted points, use paragraphed sentences instead.

Biographies and Acknowledgments

Those who contribute but do not meet all criteria for authorship should not be listed as authors, but they should be acknowledged at the end of the text. Only the names of the persons but not their roles should be written under the acknowledgment section. Authors must declare all sources of external research funding in their article and a statement to this effect should appear in the Acknowledgements section.

Authors who wish to include these items should save them together in the MS Word file to be uploaded with the submission. If they are to be included, a brief professional biography of 100 words maximum should be supplied for each named author.

Article Categories

Authors must categorize their paper as part of the article information. The category which most closely describes their paper should be selected from the list below.

• Research paper. This category covers papers that report on any type of research undertaken by the authors. The research may involve the construction or testing of a model or framework, action research, testing of data, market research or surveys, empirical, scientific, or laboratory research. 
• Technical paper. Describes and evaluates technical products, processes, or services. 
• Conceptual paper. These papers will not be based on research but will develop hypotheses. The papers are likely to be discursive and will cover philosophical discussions and comparative studies of others' work and thinking. 
• Case study reports. Case studies describe actual interventions or experiences within organizations. They may well be subjective and will not generally report on research. A description of a legal case or a hypothetical case study used as a teaching exercise would also fit into this category. 

Headings

Headings must be concise, with a clear indication of the distinction between the hierarchy of headings. The format is provided in the article's template.

Notes/Endnotes

Notes or Endnotes should be used only if absolutely necessary and must be identified in the text by consecutive numbers, enclosed in square brackets and listed at the end of the article.

Figures

All Figures (charts, diagrams, line drawings, web pages/screenshots, and photographic images) should be submitted in electronic form. All Figures should be of high quality, legible and numbered consecutively with Arabic numerals. Graphics may be supplied in color to facilitate their appearance on the online database. Figures created in MS Word, MS PowerPoint, MS Excel should be supplied in their native formats. Electronic figures created in other applications should be copied from the origination software and pasted into MS Word template document. Photographic images should be inserted in the main body of the article and of high quality.

Tables

Tables should be typed and included in the main body of the article. The position of tables should be inserted in the text as close to the point of reference as possible. Ensure that any superscripts or asterisks are shown next to the relevant items and have corresponding explanations displayed as footnotes to the table, figure or plate.

References

INTENSIF prefers articles that refer mainly to journal articles, research reports, and conference proceedings, rather than rely heavily on textbooks or handbooks to demonstrate articles' novelty in the subject discussed. The use of Mendeley as a tool in referencing is preferable and encouraged. References should be carefully checked for completeness, accuracy, and consistency.

The author(s) should cite publications in the text following the APA citation style. At the end of the paper, a reference list in alphabetical order should be supplied as follows:

Kim, Y.S. (2006). Conservation of plant diversity in Korea. Lanscape and Ecological Enginering 2: 163-170.doi:10.1007/s11355-006-0004-x

Fourqurean, J. W., Duarte, C. M., Kennedy, H., Marb , N., Holmer, M., Mateo, M. A., Serrano, O. (2012). Seagrass ecosystems as a globally significant carbon stock. Nature Geoscience, 5(7), 505-509.https://doi.org/10.1038/ngeo1477

Copyright Notice

Authors who publish with this journal agree to the following terms:
1. Copyright on any article is retained by the author(s).
2. The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal.
3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License

Privacy Statement

The name and email address entered on the journal site will only be used for the purposes stated above, will not be misused for any other purpose or for any other party.